. |
|
Custom-Parts Verschleißteile Ersatzteile Bekleidung Accessoires |
|
Startseite >> | Ihre Suchergebnisse zur Kategorie: Stecker & Kabel | Sortiert nach niedrigster Preis aufsteigend
|
Wire on spool, 14 gauge. 100 ft. Pink
Artikelnummer: 951723 Hersteller: STANDARD Beschreibung: On 100 foot (30.48 meters) spool. 14 gauge (2.08mm� or 1.63mm diameter) electrical wire. With Vinyl insulation; will resist abrasion; grease; oil and battery acid. Heat resistant up to 80�C.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wire on spool, 14 gauge. 100 ft. Purple
Artikelnummer: 951724 Hersteller: STANDARD Beschreibung: On 100 foot (30.48 meters) spool. 14 gauge (2.08mm� or 1.63mm diameter) electrical wire. With Vinyl insulation; will resist abrasion; grease; oil and battery acid. Heat resistant up to 80�C.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wire on spool, 14 gauge. 100 ft. Red
Artikelnummer: 951725 Hersteller: STANDARD Beschreibung: On 100 foot (30.48 meters) spool. 14 gauge (2.08mm� or 1.63mm diameter) electrical wire. With Vinyl insulation; will resist abrasion; grease; oil and battery acid. Heat resistant up to 80�C.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wire on spool, 14 gauge. 100 ft. White
Artikelnummer: 951726 Hersteller: STANDARD Beschreibung: On 100 foot (30.48 meters) spool. 14 gauge (2.08mm� or 1.63mm diameter) electrical wire. With Vinyl insulation; will resist abrasion; grease; oil and battery acid. Heat resistant up to 80�C.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wire on spool, 14 gauge. 100 ft. Yellow
Artikelnummer: 951727 Hersteller: STANDARD Beschreibung: On 100 foot (30.48 meters) spool. 14 gauge (2.08mm� or 1.63mm diameter) electrical wire. With Vinyl insulation; will resist abrasion; grease; oil and battery acid. Heat resistant up to 80�C.... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, handlebar wiring extension kit. +8"
Artikelnummer: 578309 Hersteller: NAMZ Beschreibung: Extended wiring harness kit is for bikes where wider or higher handlebars are installed. OEM color coded and pre-attached wire ends for stock motorcycles. Includes 24 wires. Includes throttle exten... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, throttle by wire extension. Up to +18" tall bars
Artikelnummer: 578302 Hersteller: NAMZ Beschreibung: Extra long color matching throttle extension kit for the stock ''fly-by-wire''/ ''e-throttle'' electronic throttle control wiring. Plug & Play with connectors installed. Note: Will not fit CVO or Scr... |
inkl. 19% USt. Mehr Informationen >> |
|
PVC split wiring loom. 50ft, 3/4" I.D. (19mm). Black
Artikelnummer: 951745 Hersteller: STANDARD Beschreibung: With a ''split seam'' which allows easy installation; without disconnecting the wiring. Protects against abrasion and heat. Temperature range -15�F (-26�C) and +195�F (91�C).... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, throttle by wire extension. Up to +18" tall bars
Artikelnummer: 548403 Hersteller: NAMZ Beschreibung: Extra long color matching throttle extension kit for the stock ''fly-by-wire''/ ''e-throttle'' electronic throttle control wiring. Plug & Play with connectors installed. Note: Will not fit CVO or Scr... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ Indian heated grip extension harness 24" long
Artikelnummer: 567565 Hersteller: NAMZ Beschreibung: Plug-n-Play harness to extend heated grip wiring with 24 inch (61cm) for all Indians equipped with heated grips... |
inkl. 19% USt. Mehr Informationen >> |
|
OEM style main wiring harness. FXST, FLST
Artikelnummer: 514989 Hersteller: MCS Beschreibung: Does not include handlebar; taillight; coil and regulator wiring. With color coded and pre-attached wire ends. Replacement OEM style main wiring harness for a stock motorcycle. Color coded and pre-att... |
inkl. 19% USt. Mehr Informationen >> |
|
OEM style main wiring harness. FXST, FLST
Artikelnummer: 515001 Hersteller: MCS Beschreibung: Does not include handlebar; taillight; coil and regulator wiring. With color coded and pre-attached wire ends. Replacement OEM style main wiring harness for a stock motorcycle. Color coded and pre-att... |
inkl. 19% USt. Mehr Informationen >> |
|
Kuryakyn, LED headlamp adapter harness for Tourings
Artikelnummer: 542607 Hersteller: KURYAKYN Beschreibung: Used to convert from the stock single beam halogen bulb (H9 high beam and H11 low beam) headlamp connectors to a H4 style connector; as in use with regular LED headlamps. OEM replacement reference 69... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, handlebar wiring extension kit. +4"
Artikelnummer: 548234 Hersteller: NAMZ Beschreibung: Includes 12 right & 14 left wires; complete with throttle extension. This extended wiring harness kit is used for bikes where wider or higher handlebars are installed. OEM color coded and pre-attached... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, handlebar wiring extension kit. +12"
Artikelnummer: 578310 Hersteller: NAMZ Beschreibung: Extended wiring harness kit is for bikes where wider or higher handlebars are installed. OEM color coded and pre-attached wire ends for stock motorcycles. Includes 24 wires. Includes throttle exten... |
inkl. 19% USt. Mehr Informationen >> |
|
Namz, OEM style complete EFI Harness
Artikelnummer: 559256 Hersteller: NAMZ Beschreibung: Reproduction Plug & Play harness for early Delphi fuel injected models. Comes with OEM length; color coding and specifications. Complete harness to re-wire the EFI (Electronic Fuel Injection) system.... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, throttle by wire extension. +15"
Artikelnummer: 578678 Hersteller: NAMZ Beschreibung: Complete set; with connectors; to extend the wires of the electronic throttle control when running taller or wider than stock handlebars. Note: Will not fit CVO or Screamin'' Eagle models due to har... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, handlebar wiring extension kit. +15"
Artikelnummer: 578311 Hersteller: NAMZ Beschreibung: Extended wiring harness kit is for bikes where wider or higher handlebars are installed. OEM color coded and pre-attached wire ends for stock motorcycles. Includes 24 wires. Includes throttle exten... |
inkl. 19% USt. Mehr Informationen >> |
|
Namz, Hot Box saddlebag turn signal module & harness
Artikelnummer: 578321 Hersteller: NAMZ Beschreibung: Without a load equalizer; not for use with LED turn signals. Used for adding turn signals to the saddlebags. Features detachable pigtails for turn signals. Plug & Play.... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, Plug-n-Play rear fender harness
Artikelnummer: 923321 Hersteller: NAMZ Beschreibung: Allows plug-n-play installation of additional lighting to the rear of the motorcycle without cutting or splicing the factory wiring.... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, handlebar wiring extension kit. +8"
Artikelnummer: 548235 Hersteller: NAMZ Beschreibung: Includes 12 right & 14 left wires; complete with throttle extension. This extended wiring harness kit is used for bikes where wider or higher handlebars are installed. OEM color coded and pre-attached... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, handlebar wiring extension kit. +24"
Artikelnummer: 548280 Hersteller: NAMZ Beschreibung: Extended wiring harness kit is for bikes where wider or higher handlebars are installed. OEM color coded and pre-attached wire ends for stock motorcycles. Includes 24 wires. Includes throttle exten... |
inkl. 19% USt. Mehr Informationen >> |
|
Connectors, slide-on terminal Nylon, crimp. Red 1/4" male
Artikelnummer: 951644 Hersteller: STANDARD Beschreibung: With full nylon insulation. For 22-18 gauge (0.50 to 1mm� or 0.64 to 1.02mm diameter) wiring. Note: Use with 951645 female connector.... |
inkl. 19% USt. Mehr Informationen >> |
|
Connectors, slide-on terminal Nylon, crimp. Red 1/4" female
Artikelnummer: 951645 Hersteller: STANDARD Beschreibung: With full nylon insulation. For 22-18 gauge (0.50 to 1mm� or 0.64 to 1.02mm diameter) wiring. Note: Use with 951644 female connector.... |
inkl. 19% USt. Mehr Informationen >> |
|
Standard Co, asphalt coated fabric loom. 3/8" (9.53mm) ID
Artikelnummer: 951752 Hersteller: STANDARD Beschreibung: Sold on a 50ft. (15.2 meters) roll. Seamless; moisture proof wiring loom for heavy-duty service. Temperature range up to 300�F (150�C).... |
inkl. 19% USt. Mehr Informationen >> |
|
Cycle Visions, taillight wiring harness for auxiliary lights
Artikelnummer: 968351 Hersteller: CYCLE VISIONS Beschreibung: Plugs-in between taillight & wiring harness. Fits Molex connector to 8-pin adapter. Allows auxiliary lighting to be installed.... |
inkl. 19% USt. Mehr Informationen >> |
|
Cycle Visions, taillight wiring harness for auxiliary lights
Artikelnummer: 968352 Hersteller: CYCLE VISIONS Beschreibung: Plugs-in between taillight & wiring harness. Fits Molex connector to 8-pin adapter. Allows auxiliary lighting to be installed.... |
inkl. 19% USt. Mehr Informationen >> |
|
Kuryakyn, Plug & play accessory harness
Artikelnummer: 8082461 Hersteller: KURYAKYN Beschreibung: Allows plug-&-play installation of Kuryakyn Rear Accessory Lighting... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, handlebar wiring cover kit. For external wiring, 20"
Artikelnummer: 548101 Hersteller: NAMZ Beschreibung: 20" (51cm) long. Used when fabricating your own handlebar wiring harness that is going to run outside the handlebar. Includes two pieces of braided stainless steel wiring hose; black & clear protectiv... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, handlebar wiring extension kit. +12"
Artikelnummer: 548236 Hersteller: NAMZ Beschreibung: Includes 12 right & 14 left wires; complete with throttle extension. This extended wiring harness kit is used for bikes where wider or higher handlebars are installed. OEM color coded and pre-attached... |
inkl. 19% USt. Mehr Informationen >> |
|
Standard Co, Ignition / Primary wire terminal kit
Artikelnummer: 951788 Hersteller: STANDARD Beschreibung: 235 piece kit... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, HK radio rear speaker harness
Artikelnummer: 548404 Hersteller: NAMZ Beschreibung: For stock Harman Kardon radio. Allows installation of additional speakers on stock or custom Tour-Packs. With OEM 35-pin connector. Note: Radio must be flashed by dealer to activate the rear channel... |
inkl. 19% USt. Mehr Informationen >> |
|
Type HM connector kit. 2-pin
Artikelnummer: 970835 Hersteller: MCS Beschreibung: 2 Pole... |
inkl. 19% USt. Mehr Informationen >> |
|
Motogadget, mo.unit replacement 40A fuse 40
Artikelnummer: 925379 Hersteller: MOTOGADGET Beschreibung: Replacement fuse for 925378 Motogadget mo.unit battery cable kit.... |
inkl. 19% USt. Mehr Informationen >> |
|
Motogadget, compact plug connector kit. 6-pins
Artikelnummer: 930367 Hersteller: MOTOGADGET Beschreibung: Small size for a maximum number of wires requiring a minimum of space. Includes male & female connector plug housings with matching crimp-on terminal pins. Both male & female 9-pin assembled connector... |
inkl. 19% USt. Mehr Informationen >> |
|
Motogadget, cable-end crimp connector set
Artikelnummer: 930370 Hersteller: MOTOGADGET Beschreibung: Simple and quick way to make a strong and positive connection of an electrical wire onto an existing wire-end. Inside crimp ring diameter 2mm; overall length 18mm.... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, Molex MX-150 connector. Black, receptacle, 16-pin
Artikelnummer: 578298 Hersteller: NAMZ Beschreibung: Molex MX-150 series. receptacle housing for male terminal pins. The Molex MX-150 series are started to be used in 2007 on H-D models. Waterproof and more compact than Deutsch connectors. Easy to servi... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, Molex MX-150 connector. Gray, receptacle, 16-pin
Artikelnummer: 578299 Hersteller: NAMZ Beschreibung: Molex MX-150 series. receptacle housing for male terminal pins. The Molex MX-150 series are started to be used in 2007 on H-D models. Waterproof and more compact than Deutsch connectors. Easy to servi... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, plug-off pins for Deutsch DT series connectors
Artikelnummer: 578346 Hersteller: NAMZ Beschreibung: Used to plug off an un-used plug pin hole in the receptacle or plug housing (for male pins) to prevent dirt entering.... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, Molex MX-150 connector. Gray, receptacle, 4-pin
Artikelnummer: 578356 Hersteller: NAMZ Beschreibung: Molex MX-150 series. receptacle housing for male terminal pins. The Molex MX-150 series are started to be used in 2007 on H-D models. Waterproof and more compact than Deutsch connectors. Easy to servi... |
inkl. 19% USt. Mehr Informationen >> |
|
Colony, wire clip. Timer wire
Artikelnummer: 929650 Hersteller: COLONY Beschreibung: Zinc plated. Quality OEM reproduction wire clamp of early H-D models. Repl. 4726-37.... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, Deutsch DTM connector. Black, plug, 3-pins
Artikelnummer: 951416 Hersteller: NAMZ Beschreibung: Small Deutsch DTM-series. Housing for female pins. Includes female pins; seal and plug pin lock. Deutsch connectors are the very reliable; corrosion resistant; watertight and professional electrical c... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, Deutsch DT connectors. Gray, plug housing, 3-pins
Artikelnummer: 548156 Hersteller: NAMZ Beschreibung: Deutsch DT series housing for female pins. Includes seal & plug pin lock. Deutsch connectors are the very reliable; corrosion resistant; watertight and professional electrical connectors that you can ... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, Deutsch DT connectors. Black, plug housing, 3-pins
Artikelnummer: 548157 Hersteller: NAMZ Beschreibung: Deutsch DT series housing for female pins. Includes seal & plug pin lock. Deutsch connectors are the very reliable; corrosion resistant; watertight and professional electrical connectors that you can ... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, AMP connector. receptacle, 12-pins
Artikelnummer: 548185 Hersteller: NAMZ Beschreibung: AMP Mate-n-Lock watertight and interlocking connectors. Used on motorcycles by OEM manufacturers since the mid 80''s and still to be found on many bikes today. All connectors include watertight seals.... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, Delphi-Packard connector. Plug, 2-pin
Artikelnummer: 548206 Hersteller: NAMZ Beschreibung: Connector plug comes with the ''male'' pin. Note: For the matching 2-pin connector see 548205 receptacle connector. Note: See 548213 for the replacement ''male'' pin.... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, Delphi-Packard connector. Plug, 5-pin
Artikelnummer: 548210 Hersteller: NAMZ Beschreibung: Connector plug comes with the ''male'' pin. Note: For the matching 5-pin connector see 548209 receptacle connector. Note: See 548213 for the replacement ''male'' pin.... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, Delphi EFI connector. Male plug. 4-pin
Artikelnummer: 548255 Hersteller: NAMZ Beschreibung: Includes male terminal pins and seals. Ignition coil; idle speed sensor; fuel pump; fuel gauge; wiring harness fairing. OEM replacement reference 72066-06. Note: See 548314 for the matching female plu... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, JST Mini connector. White, plug, 8-pin
Artikelnummer: 548272 Hersteller: NAMZ Beschreibung: receptacle housing for female terminal pins. Miniature waterproof connectors; the smallest available. JST Mini connectors are designed for small 22 gauge (0.65mm o) wire and come complete with wire se... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, AMP Multilock connector. Black, plug, 8-pins
Artikelnummer: 548398 Hersteller: NAMZ Beschreibung: Plug housing for female terminal pins. This is the OEM 2nd. series electrical connector style as mostly found on 96-00 H-D models. These small and compact connectors have been used on many application... |
inkl. 19% USt. Mehr Informationen >> |