. |
|
Custom-Parts Verschleißteile Ersatzteile Bekleidung Accessoires |
|
Startseite >> | Ihre Suchergebnisse zur Kategorie: Stecker & Kabel | Sortiert nach niedrigster Preis aufsteigend
|
OEM style main wiring harness. XL, XLS
Artikelnummer: 970552 Hersteller: MCS Beschreibung: Does not include handlebar; taillight; coil and regulator wiring. With color coded and pre-attached wire ends. This is a replacement OEM style main wiring harness for a stock motorcycle. Color coded a... |
inkl. 19% USt. Mehr Informationen >> |
|
OEM style main wiring harness. XLH
Artikelnummer: 970553 Hersteller: MCS Beschreibung: Does not include handlebar; taillight; coil and regulator wiring. With color coded and pre-attached wire ends. Replacement OEM style main wiring harness for a stock motorcycle. Color coded and pre-att... |
inkl. 19% USt. Mehr Informationen >> |
|
Standard Co, crimp-type self solder heat shrink terminal kit
Artikelnummer: 951796 Hersteller: STANDARD Beschreibung: 110 piece kit. Includes insulated crimp-type; self solder terminals that will automatically heat shrink... |
inkl. 19% USt. Mehr Informationen >> |
|
Handlebar switch & wiring kit. Standard. LED. Chrome
Artikelnummer: 920145 Hersteller: MCS Beschreibung: With amber backlit LEDs to light the symbols. Direct replacement switch housing switches. Incl. brake light switch; terminals and hardware. Ready to install. Complete with pre-installed 60" (152cm) w... |
inkl. 19% USt. Mehr Informationen >> |
|
Namz, Deutsch DT series plug housing seal, 2-pins
Artikelnummer: 950825 Hersteller: NAMZ Beschreibung: Replacement seals. Fits 548154 & 548155 plug housings.... |
inkl. 19% USt. Mehr Informationen >> |
|
Namz, Deutsch DT series plug housing seal, 3-pins
Artikelnummer: 950826 Hersteller: NAMZ Beschreibung: Replacement seals. Fits 548156 & 548157 plug housings.... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, AMP/TE connector. White, plug, 8-pins
Artikelnummer: 951214 Hersteller: NAMZ Beschreibung: Housing for the female terminal pins. This is the non-sealed AMP OEM 1st. series electrical connector style as used on most H-D 71-95 models. Excellent choice for an OEM style restauration. Note: 50... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, AMP/TE connector. White, receptacle, 8-pins
Artikelnummer: 951215 Hersteller: NAMZ Beschreibung: Housing for male terminal pins. This is the non-sealed AMP OEM 1st. series electrical connector style as used on most H-D 71-95 models. Excellent choice for an OEM style restauration. Note: 502465 mal... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, AMP 040 series connector. Black, plug, 2-pin
Artikelnummer: 951437 Hersteller: NAMZ Beschreibung: Plug housing for female terminal pins. This is the electrical connector style as commenly found on 01-up H-D models. Non-sealed OEM 3rd. series. Great for use on many custom applications. Note: 9514... |
inkl. 19% USt. Mehr Informationen >> |
|
Spiral wrap, wiring loom. 1/2" dia. Blue
Artikelnummer: 951758-1 Hersteller: STANDARD Beschreibung: 5 FT... |
inkl. 19% USt. Mehr Informationen >> |
|
Spiral wrap, wiring loom. 1/2" dia. Yellow
Artikelnummer: 951759-1 Hersteller: STANDARD Beschreibung: 5 FT... |
inkl. 19% USt. Mehr Informationen >> |
|
Spiral wrap, wiring loom. 1/2" dia. Clear
Artikelnummer: 951771-1 Hersteller: STANDARD Beschreibung: 5 FT... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, AMP connector. receptacle, 2-pins
Artikelnummer: 548175 Hersteller: NAMZ Beschreibung: AMP Mate-n-Lock watertight and interlocking connectors. Used on motorcycles by OEM manufacturers since the mid 80''s and still to be found on many bikes today. All connectors include watertight seals.... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, AMP Multilock connector. Black, plug, 2-pins
Artikelnummer: 548190 Hersteller: NAMZ Beschreibung: Plug housing for female terminal pins. This is the OEM 2nd. series electrical connector style as mostly found on 96-00 H-D models. These small and compact connectors have been used on many application... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, AMP Multilock connector. Black, receptacle, 3-pins
Artikelnummer: 548196 Hersteller: NAMZ Beschreibung: receptacle housing for male terminal pins. This is the OEM 2nd. series electrical connector style as mostly found on 96-00 H-D models. These small and compact connectors have been used on many applica... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, AMP Multilock connector. Black, receptacle, 4-pins
Artikelnummer: 548197 Hersteller: NAMZ Beschreibung: receptacle housing for male terminal pins. This is the OEM 2nd. series electrical connector style as mostly found on 96-00 H-D models. These small and compact connectors have been used on many applica... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, AMP Multilock connector. Black, receptacle, 6-pins
Artikelnummer: 548198 Hersteller: NAMZ Beschreibung: receptacle housing for male terminal pins. This is the OEM 2nd. series electrical connector style as mostly found on 96-00 H-D models. These small and compact connectors have been used on many applica... |
inkl. 19% USt. Mehr Informationen >> |
|
DELPHI-PACKHARD TERMINAL PINS, FEMALE
Artikelnummer: 548213-1 Hersteller: NAMZ Beschreibung: USE WITH DELPHI PACKHARD CONNECTORS... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, JAE MX-1900 connector. Black, receptacle, 2-pins
Artikelnummer: 548414 Hersteller: NAMZ Beschreibung: JAE MX-1900 series. receptacle Housing for male pins. Very small connector ss used on various H-D models with CAN-bus wiring system. Applications include handlebar switch wiring; front turn signal har... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, Molex MX-150 connector. Black, receptacle, 3-pin
Artikelnummer: 578288 Hersteller: NAMZ Beschreibung: Molex MX-150 series. receptacle housing for male terminal pins. The Molex MX-150 series are started to be used in 2007 on H-D models. Waterproof and more compact than Deutsch connectors. Easy to servi... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, AMP/TE connector. White, plug, 6-pins
Artikelnummer: 990631 Hersteller: NAMZ Beschreibung: Housing for the female terminal pins. This is the non-sealed AMP OEM 1st. series electrical connector style as used on most H-D 71-95 models. Excellent choice for an OEM style restauration. Note: 50... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, AMP/TE connector. White, receptacle, 6-pins
Artikelnummer: 990757 Hersteller: NAMZ Beschreibung: Housing for male terminal pins. This is the non-sealed AMP OEM 1st. series electrical connector style as used on most H-D 71-95 models. Excellent choice for an OEM style restauration. Note: 502465 mal... |
inkl. 19% USt. Mehr Informationen >> |
|
Connectors, Slide-On terminal, crimp/shrink. Yellow, 1/4"
Artikelnummer: 951781 Hersteller: STANDARD Beschreibung: 1/4" male insulated. Yellow; for 12-10 gauge (2.5 to 6mm� or 2.05 to 2.59mm diameter) wiring. Crimp connectors with the extra insurance of heat shrink tubing. Stronger than just a crimp. Offers impr... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Connectors, Slide-On terminal, crimp/shrink. Yellow, 1/4"
Artikelnummer: 951782 Hersteller: STANDARD Beschreibung: 1/4" female insulated. Yellow; for 12-10 gauge (2.5 to 6mm� or 2.05 to 2.59mm diameter) wiring. Crimp connectors with the extra insurance of heat shrink tubing. Stronger than just a crimp. Offers im... |
inkl. 19% USt. Mehr Informationen >> |
|
Connectors, Butt Splice, crimp/shrink. Red
Artikelnummer: 951783 Hersteller: STANDARD Beschreibung: Crimped with heat shrink tubing. Red; for 22-18 gauge (0.50 to 1mm� or 0.64 to 1.02mm diameter) wiring. Tube shaped and used to crimp two wire ends together to lengthen or repair existing wiring. Co... |
inkl. 19% USt. Mehr Informationen >> |
|
Connectors, Butt Splice, crimp/shrink. Blue
Artikelnummer: 951784 Hersteller: STANDARD Beschreibung: Crimped with heat shrink tubing. Blue; for 16-14 gauge (1.0 to 2.5mm� or 1.02mm to 1.63mm diameter) wiring. Tube shaped and used to crimp two wire ends together to lengthen or repair existing wiring... |
inkl. 19% USt. Mehr Informationen >> |
|
Turn signal wiring extension kit. +15"
Artikelnummer: 900492 Hersteller: MCS Beschreibung: Used to relocate handlebar mounted turn signals or when installing higher than stock handlebars. Note: Will not fit 11-up models with CAN-bus / HDLAN wiring system.... |
inkl. 19% USt. Mehr Informationen >> |
|
Gardner-Westcott, line clamp 3/8" ID. Stainless
Artikelnummer: 905517 Hersteller: GARDNER-WESTCOTT Beschreibung: 3/8" (9.52mm) Inside Diameter. Stainless steel with a protective rubber guard. Used for routing brake lines; operating cables or electrical wiring.... |
inkl. 19% USt. Mehr Informationen >> |
|
Rick''s wiring harness connector kit
Artikelnummer: 912937 Hersteller: Rick''s Motorsport Electronics Beschreibung: This kit includes the opposite end connectors & terminals for Rick''s 912172; 912174 & 912181 rectifier-regulators.... |
inkl. 19% USt. Mehr Informationen >> |
|
Rick''s wiring harness connector kit
Artikelnummer: 912945 Hersteller: Rick''s Motorsport Electronics Beschreibung: This kit includes the opposite end plugs for Rick''s 912159 rectifier-regulator.... |
inkl. 19% USt. Mehr Informationen >> |
|
Colony, wire clip frame head tube
Artikelnummer: 929644 Hersteller: COLONY Beschreibung: Quality OEM reproduction wire clamp of early H-D models. Repl. 10012.... |
inkl. 19% USt. Mehr Informationen >> |
|
Colony, wire clip. Seat & frame
Artikelnummer: 929645 Hersteller: COLONY Beschreibung: Seat post tube; frame tube and frame head. Quality OEM reproduction wire clamp of early H-D models. Repl. 4730-30A.... |
inkl. 19% USt. Mehr Informationen >> |
|
Colony, wire clip, brake light / battery wire
Artikelnummer: 929646 Hersteller: COLONY Beschreibung: Quality OEM reproduction wire clamp of early H-D models. Repl. 4227-30.... |
inkl. 19% USt. Mehr Informationen >> |
|
Colony, wire clip taillight
Artikelnummer: 929647 Hersteller: COLONY Beschreibung: Quality OEM reproduction wire clamp of early H-D models. Repl. 4727-23.... |
inkl. 19% USt. Mehr Informationen >> |
|
Colony, wire clip. Frame head tube
Artikelnummer: 929651 Hersteller: COLONY Beschreibung: Zinc plated. ''Type I''. Frame head tube (bull neck). Quality OEM reproduction wire clamp. Repl. 1977.... |
inkl. 19% USt. Mehr Informationen >> |
|
Colony, wire clip. Frame head tube
Artikelnummer: 929652 Hersteller: COLONY Beschreibung: Zinc plated. ''Type II''. Frame head tube (bull neck). Quality OEM reproduction wire clamp. Repl 1977.... |
inkl. 19% USt. Mehr Informationen >> |
|
Colony, wire clip. Frame head tube
Artikelnummer: 929653 Hersteller: COLONY Beschreibung: Black parkerized. ''Type III''. Frame head tube (bull neck). Quality OEM reproduction wire clamp. Repl. 9977.... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, Deutsch DTM connector. Black, receptacle, 6-pins
Artikelnummer: 951335 Hersteller: NAMZ Beschreibung: Small Deutsch DTM-series. Housing for male pins. Includes male pins and receptacle pin lock. Deutsch connectors are the very reliable; corrosion resistant; watertight and professional electrical conne... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, headlamp connector, low beam. 2-pin. Black
Artikelnummer: 951395 Hersteller: NAMZ Beschreibung: Female plug. Includes wire seals and terminals. Repl. 72449-01. Note: See 951396 for high beam connector.... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, AMP .25" speaker terminals. Black
Artikelnummer: 548407 Hersteller: NAMZ Beschreibung: Female speaker terminals. OEM style replacement for 77290-94.... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, Deutsch DT header series. 4-pin
Artikelnummer: 548419 Hersteller: NAMZ Beschreibung: The Deutsch DT Header system consist of a Header male and a female side connector; that are sold separately. Perfect for adding audio or lighting to saddlebags; Tour-Paks; fairings or any other flat s... |
inkl. 19% USt. Mehr Informationen >> |
|
OEM style main wiring harness. FLH
Artikelnummer: 515008 Hersteller: MCS Beschreibung: Does not include handlebar; taillight; coil and regulator wiring. With color coded and pre-attached wire ends. Replacement OEM style main wiring harness for a stock motorcycle. Color coded and pre-att... |
inkl. 19% USt. Mehr Informationen >> |
|
OEM style main wiring harness. FLH
Artikelnummer: 515009 Hersteller: MCS Beschreibung: Does not include handlebar; taillight; coil and regulator wiring. With color coded and pre-attached wire ends. Replacement OEM style main wiring harness for a stock motorcycle. Color coded and pre-att... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, Mini MCL male & female connector and terminal kit
Artikelnummer: 548418 Hersteller: NAMZ Beschreibung: For e-throttle harness. Includes the male & female connector and the male and femal wire terminals. For e-throttle Harnesses. OEM style replacement. Replaces none.... |
inkl. 19% USt. Mehr Informationen >> |
|
LED headlamp adapter harness for Tourings
Artikelnummer: 568318 Hersteller: MCS Beschreibung: Used to convert from the stock single beam halogen bulb (H9 high beam and H11 low beam) headlamp connectors to a H4 style connector; as in use with regular LED headlamps. OEM replacement reference 692... |
inkl. 19% USt. Mehr Informationen >> |
|
NAMZ, male pins for AMP 040 series connectors
Artikelnummer: 951433 Hersteller: NAMZ Beschreibung: Male crimp-on terminal pin. Used with 951430 & 951431 connector housings. Note: See 548202 for crimp tool. Note: See 951434 for female pin.... |
inkl. 19% USt. Mehr Informationen >> |
|
Connectors, ring terminal PVC, crimp. Yellow 3.5mm
Artikelnummer: 951611 Hersteller: STANDARD Beschreibung: Stud #6 (3.5mm). For 12-10 gauge (2.5 to 6mm� or 2.05 to 2.59mm diameter) wiring.... |
inkl. 19% USt. Mehr Informationen >> |
|
Connectors, ring terminal PVC, crimp. Yellow 7.94mm
Artikelnummer: 951615 Hersteller: STANDARD Beschreibung: Stud 5/16" (7.94mm). For 12-10 gauge (2.5 to 6mm� or 2.05 to 2.59mm diameter) wiring.... |
inkl. 19% USt. Mehr Informationen >> |
|
Connectors, spade terminal PVC, crimp. Yellow 3.5mm
Artikelnummer: 951621 Hersteller: STANDARD Beschreibung: Stud #6 (3.5mm). For 12-10 gauge (2.5 to 6mm� or 2.05 to 2.59mm diameter) wiring.... |
inkl. 19% USt. Mehr Informationen >> |
|
Connectors, spade terminal PVC, crimp. Yellow 4.1mm
Artikelnummer: 951622 Hersteller: STANDARD Beschreibung: Stud #8 (4.1mm). For 12-10 gauge (2.5 to 6mm� or 2.05 to 2.59mm diameter) wiring.... |
inkl. 19% USt. Mehr Informationen >> |