. |
|
Custom-Parts Verschleißteile Ersatzteile Bekleidung Accessoires |
|
Startseite >> | Ihre Suchergebnisse zur Kategorie: Batterie - Ladegeraete | Sortiert nach niedrigster Preis aufsteigend
|
CTEK, Comfort indicator pigtail
Artikelnummer: 906069 Hersteller: CTEK Beschreibung: Plugs into any SAE connector and allows a CTEK ''Comfort Connect'' style connector to be used on the other end. Equipped with a 3-LED quick battery status indication system; which has a very low powe... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate OptiMATE Pro 4 battery charger. 12V
Artikelnummer: 941416 Hersteller: OPTIMATE Beschreibung: With EU wall plug. Professional 4-bank battery saving charger for power sport & small engine 12V batteries. No further battery knowledge required. Connect up to 4 x 12V batteries and let the charger d... |
inkl. 19% USt. Mehr Informationen >> |
|
CTEK, Comfort indicator eyelet M6
Artikelnummer: 906071 Hersteller: CTEK Beschreibung: The INDICATOR - Eyelet connector''. 50cm long wiring. Used to quick-connect the charger to the battery. It comes with two 6.4mm diameter eyelets that are permanently connected to the battery. The othe... |
inkl. 19% USt. Mehr Informationen >> |
|
CTEK, BUMPER10 protective charger bumper for 0.8A chargers
Artikelnummer: 906059 Hersteller: CTEK Beschreibung: Bumper 10. Fits XS 0.8 chargers (906041 and 906042). This is a protective silicone rubber bumper that fits snugly around the charger body and offers additional grip and damage protection.... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate, OptiMATE battery charge cable O-01
Artikelnummer: 941545 Hersteller: OPTIMATE Beschreibung: Premium quick connect permanent battery lead for power sport batteries; with weather protected connection system and cable. - Weatherproof battery lead; powersport - Length=20"/50cm - 1/4" / M6 ring... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate, OptiMATE Pro 8 battery charger. 12V/6V
Artikelnummer: 941417 Hersteller: OPTIMATE Beschreibung: With EU wall plug. Professional 8-bank battery saving charger for power sport & small engine 12V & 6V batteries; including neglected sulphated / low-voltage batteries. Once voltage selection has been ... |
inkl. 19% USt. Mehr Informationen >> |
|
Battery Tender, Power Tender 12V@5A High Efficiency
Artikelnummer: 501303 Hersteller: BATTERY TENDER Beschreibung: UK wall plug. Charges all flooded; sealed; maintenance free; AGM and lead acid batteries. Water resistant and shock/vibration resistant with a weight less than 2kg. A compact and sturdy charger; ready... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Battery Tender, Power Tender 12V@5A High Efficiency
Artikelnummer: 501302 Hersteller: BATTERY TENDER Beschreibung: EU wall plug. Charges all flooded; sealed; maintenance free; AGM and lead acid batteries. Water resistant and shock/vibration resistant with a weight less than 2kg. A compact and sturdy charger; ready... |
inkl. 19% USt. Mehr Informationen >> |
|
CTEK, battery charger CT5 TIME TO GO EU
Artikelnummer: 963312 Hersteller: CTEK Beschreibung: 5.0A 12V. For 20Ah to 160Ah lead-acid (AGM; GEL; EFB; MF; CaCa) batteries. This CT5 TIME TO GO battery charger and trickle charger / maintainer is a world first since it and answers the question: ''Wh... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate OptiMATE, BatteryMate 150/9 battery charger
Artikelnummer: 941415 Hersteller: OPTIMATE Beschreibung: With EU wall plug. The power sport OEM recommended load tester; power desulphator and charger for all types of 12V lead-acid batteries. The BatteryMate has been saving batteries for 25 years! - New ba... |
inkl. 19% USt. Mehr Informationen >> |
|
CTEK, MXS 5.0 T battery charger, EU
Artikelnummer: 906048 Hersteller: CTEK Beschreibung: EU wall plug. 5.0A 12V charger. For 1.2Ah to 110Ah lead-acid (AGM; GEL; EFB; MF; CaCa) batteries. The MXS 5.0 is an advanced microprocessor controlled battery charger which gives unrivalled performan... |
inkl. 19% USt. Mehr Informationen >> |
|
|
CTEK, MXS 5.0 T battery charger, UK
Artikelnummer: 906049 Hersteller: CTEK Beschreibung: UK wall plug. 5.0A 12V charger. For 1.2Ah to 110Ah lead-acid (AGM; GEL; EFB; MF; CaCa) batteries. The MXS 5.0 is an advanced microprocessor controlled battery charger which gives unrivalled performan... |
inkl. 19% USt. Mehr Informationen >> |
|
Shido, multi battery charger 12V DC 8.0 (EU)
Artikelnummer: 932961 Hersteller: Shido Beschreibung: Will charge 12V lead-acid; AGM and Lithium LiFePO4 batteries. Manual charge selection for battery type and will select correct 2-8A charge cycles to maximize battery life. Can be used as trickle charg... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate OptiMATE 6, Ampmatic battery charger
Artikelnummer: 941207 Hersteller: OPTIMATE Beschreibung: With EU wall plug. 9-step 12V 5A Battery Saving charger-tester-maintainer. Saves batteries other chargers can't; because it recognizes the difference between a discharged battery that needs charging a... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate OptiMATE, Lithium 4S 5A battery charger
Artikelnummer: 941406 Hersteller: OPTIMATE Beschreibung: With EU wall plug. 10-step 12.8V/13.2V 5A battery saving charger-tester-maintainer. The ultimate LiFePO4 / LPF Lithium Iron Phosphate) professional level battery diagnostic & maintenance charger and t... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate OptiMATE 6, Select battery charger
Artikelnummer: 941208 Hersteller: OPTIMATE Beschreibung: With EU wall plug. 9-step 12V 5Amp charger for 12V starter and deep cycle Lead Acid; AGM; GEL & deep cycle 12V batteries from 3 - 240Ah. Perfect for accurate temperature controlled charging and unsupe... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate OptiMATE 3 x 2 12V battery charger
Artikelnummer: 941201 Hersteller: OPTIMATE Beschreibung: With EU wall plug. 7-step; 2-bank 12V 0.8A battery charger-tester-maintainer for 2 x Lead Acid; AGM & GEL 12V batteries from 3 to 50Ah. Recovers sulphated batteries and then tests after charging. Main... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate OptiMATE 6, 12/24V battery charger
Artikelnummer: 941402 Hersteller: OPTIMATE Beschreibung: With EU wall plug. 8 step 12V 5A / 24V 2.5A battery saving charger-tester-maintainer. Used for 12V and 24V starter and deep cycle Lead Acid; AGM; GEL & Deep Cycle batteries (12V=3Ah to 240Ah; 24V=1Ah ... |
inkl. 19% USt. Mehr Informationen >> |
|
Battery Tender, charge cable with alligator clips
Artikelnummer: 990053 Hersteller: BATTERY TENDER Beschreibung: Quick Disconnect charge cable. Alligator clips on one & SAE connector on other side. Lets you connect any Battery Tender or other charger with SAE connector. 66cm long.... |
inkl. 19% USt. Mehr Informationen >> |
|
Shido, battery charge cable with crocodile clamps
Artikelnummer: 932964 Hersteller: Shido Beschreibung: Max 30A.... |
inkl. 19% USt. Mehr Informationen >> |
|
Shido, quick connect battery charge cable
Artikelnummer: 932965 Hersteller: Shido Beschreibung: Max 4.0A. With fuse and 6mm eyelets.... |
inkl. 19% USt. Mehr Informationen >> |
|
CTEK, Comfort indicator clamps
Artikelnummer: 906068 Hersteller: CTEK Beschreibung: The INDICATOR - Clamp''. 1.5 meter cable length A practical and quick way to connect your CTEK charger to your battery and see on the ''traffic light'' LED indicator system a battery status indication... |
inkl. 19% USt. Mehr Informationen >> |
|
CTEK, Comfort connect battery clamp
Artikelnummer: 906066 Hersteller: CTEK Beschreibung: The CONNECT - Clamp'' is a 46cm long practical; quick and easy way to connect your CTEK charger to your battery. Perfect for moving your charger quickly between different batteries in workshops or sho... |
inkl. 19% USt. Mehr Informationen >> |
|
Shido, cigarette lighter plug cable
Artikelnummer: 932966 Hersteller: Shido Beschreibung: 8A. 21-12mm. Allows you to draw power or charge the battery through an on-board cigarette lighter / power point.... |
inkl. 19% USt. Mehr Informationen >> |
|
CTEK, CT5 protective charger bumper
Artikelnummer: 906063 Hersteller: CTEK Beschreibung: CTEK's charger BUMPER for CT5 Powersport chargers. This is a protective silicone rubber bumper that fits snugly around the charger body and offers additional grip and damage protection.... |
inkl. 19% USt. Mehr Informationen >> |
|
CTEK, BUMPER60 protective charger bumper for 3.8&5A chargers
Artikelnummer: 906061 Hersteller: CTEK Beschreibung: Bumper 60. Fits MSX chargers 3.8A (906046 / 906047) and 5.0A (906048 / 906049). This is a protective silicone rubber bumper that fits snugly around the charger body and offers additional grip and dama... |
inkl. 19% USt. Mehr Informationen >> |
|
Battery Tender, QDC 12V USB charger, 2.1A USB output
Artikelnummer: 991304 Hersteller: BATTERY TENDER Beschreibung: Will not damage / overload small devices. This QDC (Quick Disconnect Charger) plugs directly into the standard Battery Tender quick disconnect charge cable; if you have it installed on your bike. Alte... |
inkl. 19% USt. Mehr Informationen >> |
|
YCX6 Smart Battery Charger
Artikelnummer: CCE924933 Hersteller: YUASA Beschreibung: YCX6 Smart Battery Charger... |
inkl. 19% USt. Mehr Informationen >> |
|
Battery Tender, extension charge cable 25ft.
Artikelnummer: 990048 Hersteller: BATTERY TENDER Beschreibung: Quick Disconnect charge cable. With dual SAE connector. Lets you connect any Battery Tender or other charger with SAE connector. 25 Ft. (7.5 meters).... |
inkl. 19% USt. Mehr Informationen >> |
|
Battery Tender, International Plus - 1.25A charger
Artikelnummer: 990077 Hersteller: BATTERY TENDER Beschreibung: EU wall plug. 2 bank charger 12V. Allows charging / maintaining 1 or 2 batteries at once. Dimensions: 11.5cm wide x 8.5cm high x 17.5cm deep.Microprocessor controlled; 100-240V compatible. Adapts to b... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Battery Tender, International Plus - 1.25A charger
Artikelnummer: 990078 Hersteller: BATTERY TENDER Beschreibung: UK wall plug. 2 bank charger 12V. Allows charging / maintaining 1 or 2 batteries at once. Dimensions: 11.5cm wide x 8.5cm high x 17.5cm deep.Microprocessor controlled; 100-240V compatible. Adapts to b... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate OptiMATE, 7 Select battery charger
Artikelnummer: 941405 Hersteller: OPTIMATE Beschreibung: With EU wall plug. 9-step 10Amp battery charger for 12V Lead Acid; AGM; GEL starter & Deep Cycle batteries from 3 - 400Ah that demand accurate temperature controlled charging and unsupervised safe lon... |
inkl. 19% USt. Mehr Informationen >> |
|
CTEK, Comfort connect extension cable, 2.5m
Artikelnummer: 906067 Hersteller: CTEK Beschreibung: The CONNECT - Extension Cable'' is 2.5 meters long and used when the battery is too far away from the charger to plug-in. Plugs into the CTEK charger's ''Comfort Connect'' accessory plug and attach th... |
inkl. 19% USt. Mehr Informationen >> |
|
CTEK, MXS 3.8A and 5.0A battery charger mounting bracket
Artikelnummer: 906057 Hersteller: CTEK Beschreibung: MXS charger wall mount. Allows you to store the MSX charger and also stores the clamp-on charge cables; when not in use. Fits all MXS chargers; both 3.8A (906046 / 906047) and 5A (906048 / 906049) mo... |
inkl. 19% USt. Mehr Informationen >> |
|
CTEK, CT5 battery charger mounting bracket
Artikelnummer: 906058 Hersteller: CTEK Beschreibung: CT5 charger wall mount. Allows you to store the CT5 charger and also stores the clamp-on charge cables; when not in use. Fits CT5 chargers (906043 and 906044). The open frame design allows easy access... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate Testmate Auto 2 battery tester
Artikelnummer: 941509 Hersteller: OPTIMATE Beschreibung: The TestMate provides within seconds a professional assessment of the state of health; state of charge and CCA capability of a 12V battery. The TestMate is compact; light; and can be used in the works... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate, OptiMATE battery charge cable O-14
Artikelnummer: 941546 Hersteller: OPTIMATE Beschreibung: Battery clips with a 15A fuse; with `easy grip' rubber handles; custom designed to fit round; square (power sport) and flat tab posts. - Length=20"/50cm - Industry standard SAE 2-pin connector - 15... |
inkl. 19% USt. Mehr Informationen >> |
|
Shido, battery charge extension cable. 3 meters
Artikelnummer: 932963 Hersteller: Shido Beschreibung: Max 4A.... |
inkl. 19% USt. Mehr Informationen >> |
|
Battery Tender, QDC volt meter
Artikelnummer: 991305 Hersteller: BATTERY TENDER Beschreibung: This QDC (Quick Disconnect Charger) plugs directly into the standard Battery Tender quick disconnect charge cable that is already installed on your bike. With LCD display that shows actual voltage. Th... |
inkl. 19% USt. Mehr Informationen >> |
|
Shido, quick connect battery charge/monitor cable
Artikelnummer: 932962 Hersteller: Shido Beschreibung: For wet lead-acid / AGM batteries (excl. lithium batteries). Max 4.0A. With 6mm eyelets. With green/amber/red LED charge indicators... |
inkl. 19% USt. Mehr Informationen >> |
|
Shido, quick connect battery charge/monitor cable. Lithium
Artikelnummer: 932967 Hersteller: Shido Beschreibung: For lithium LiFePO4 batteries only. Max 4.0A. With 6mm eyelets. With green/amber/red LED charge indicators... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate OptiMATE, Pro 1 DUO 12B 10A battery charger
Artikelnummer: 958059 Hersteller: OPTIMATE Beschreibung: With EU wall plug. Professional variable 0.4A to 10A 12V diagnostic battery charger-tester & power supply for powersport & small craft / machine professionals; repair shops and battery retailers. - P... |
inkl. 19% USt. Mehr Informationen >> |
|
CTEK, BUMPER120 protective charger bumper for 10A chargers
Artikelnummer: 906062 Hersteller: CTEK Beschreibung: Bumper 120. Fits MSX 10A charger (906054 / 906056). This is a protective silicone rubber bumper that fits snugly around the charger body and offers additional grip and damage protection.... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate OptiMATE Monitor O-125 cable
Artikelnummer: 941544 Hersteller: OPTIMATE Beschreibung: Monitor cable for AGM / Lead Acid batteries. 15cm long. Inline with 2-pin SAE to 2-pin SEA connectors with waterproof sealing cap. 4 LEDs cover `full to empty' voltage range of all 12V batteries; incl... |
inkl. 19% USt. Mehr Informationen >> |
|
CH-15000 Battery Charger 15A
Artikelnummer: CCE921665 Hersteller: Unibat Beschreibung: CH-15000 Battery Charger 15A... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate OptiMATE USB O-100 USB charger
Artikelnummer: 941547 Hersteller: OPTIMATE Beschreibung: Combination 2400mA USB charger and 3-LED battery monitor; with vehicle battery protection. - Vehicle battery protection: USB output turns off 3 hours after engine stopped or when vehicle battery char... |
inkl. 19% USt. Mehr Informationen >> |
|
CTEK, CS ONE Battery charger. EU wall plug
Artikelnummer: 954368 Hersteller: CTEK Beschreibung: 8A 12V charger. For 3Ah to 180Ah lead-acid (AGM; GEL; EFB; MF; CaCa) and lithium batteries. The CS ONE has APTOT (Adaptive Charging) technology to recognise the type of battery you want to charge and ... |
inkl. 19% USt. Mehr Informationen >> |
|
|
CTEK, CS ONE Battery charger. UK wall plug
Artikelnummer: 954369 Hersteller: CTEK Beschreibung: 8A 12V charger. For 3Ah to 180Ah lead-acid (AGM; GEL; EFB; MF; CaCa) and lithium batteries. The CS ONE has APTOT (Adaptive Charging) technology to recognise the type of battery you want to charge and ... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate OptiMATE USB O-105 USB charger
Artikelnummer: 941548 Hersteller: OPTIMATE Beschreibung: 90� angled socket. Fast charge 2 mobile devices at the same time. Fits into a standard BIKE power socket of BMW; Triumph or Ducati MultiStrada. - Connects to a standard BIKE (DIN O12mm) power socke... |
inkl. 19% USt. Mehr Informationen >> |
|
Tecmate OptiMATE USB O-115 USB charger
Artikelnummer: 941549 Hersteller: OPTIMATE Beschreibung: Straight socket. Fast charge 2 mobile devices at the same time. Fits into a standard BIKE power socket of BMW; Triumph or Ducati MultiStrada. - Connects to a standard BIKE (DIN O12mm) power socket -... |
inkl. 19% USt. Mehr Informationen >> |