. |
|
Custom-Parts Verschleißteile Ersatzteile Bekleidung Accessoires |
|
Startseite >> | Ihre Suchergebnisse zur Kategorie: Werkzeug & Zubehoer | Sortiert nach niedrigster Preis aufsteigend
|
Alpen, Sprint master drill bit size 1,0mm
Artikelnummer: 954177-1 Hersteller: Alpen Beschreibung: Experts are found in all walks of life and in this case; when push comes to shove; the ''okay'' of an average HSS drill may not be enough. Then you need to enter territory where specific expertise is ... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Alpen, Sprint master drill size 1,5mm
Artikelnummer: 954178-1 Hersteller: Alpen Beschreibung: Experts are found in all walks of life and in this case; when push comes to shove; the ''okay'' of an average HSS drill may not be enough. Then you need to enter territory where specific expertise is ... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Alpen, Sprint master drill size 2,0mm
Artikelnummer: 954180-1 Hersteller: Alpen Beschreibung: Experts are found in all walks of life and in this case; when push comes to shove; the ''okay'' of an average HSS drill may not be enough. Then you need to enter territory where specific expertise is ... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Alpen, Sprint master drill size 2,5mm
Artikelnummer: 954181-1 Hersteller: Alpen Beschreibung: Experts are found in all walks of life and in this case; when push comes to shove; the ''okay'' of an average HSS drill may not be enough. Then you need to enter territory where specific expertise is ... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Alpen, Sprint master drill size 3mm
Artikelnummer: 954182-1 Hersteller: Alpen Beschreibung: Experts are found in all walks of life and in this case; when push comes to shove; the ''okay'' of an average HSS drill may not be enough. Then you need to enter territory where specific expertise is ... |
inkl. 19% USt. Mehr Informationen >> |
|
Alpen, HSS Cobalt drill size 1,0mm
Artikelnummer: 954276-1 Hersteller: Alpen Beschreibung: Application: 5% cobalt-alloyed jobber drills with an extremely sturdy construction (re-inforced web) for drilling under difficult cult conditions like poor chip removal and deep holes; for use in stee... |
inkl. 19% USt. Mehr Informationen >> |
|
Pressol, follower plate grease cartridge
Artikelnummer: 599717 Hersteller: Pressol Beschreibung: For use with 400 gram grease cartridges; according to DIN 1284.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" bit for Phillips screws PH3
Artikelnummer: 581805-1 Hersteller: Wera Beschreibung: 1/4" drive; 25mm long. Universal; tough. Compatible with 1/4" drive DIN ISO 1173-C 6.3 bit holders. Series 851/1 Z - Phillips bits. Size: PH3.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" bit for Phillips screws PH1
Artikelnummer: 581803-1 Hersteller: Wera Beschreibung: 1/4" drive; 25mm long. Universal; tough. Compatible with 1/4" drive DIN ISO 1173-C 6.3 bit holders. Series 851/1 Z - Phillips bits. Size: PH1.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" bit for Pozidriv screws PZ1
Artikelnummer: 581809-1 Hersteller: Wera Beschreibung: 1/4" drive; 25mm long. Universal; tough. Compatible with 1/4" drive DIN ISO 1173-C 6.3 bit holders. Series 855/1 Z - Pozidriv bits. Size: PZ1.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" bit for Phillips screws PH2
Artikelnummer: 581804-1 Hersteller: Wera Beschreibung: 1/4" drive; 25mm long. Universal; tough. Compatible with 1/4" drive DIN ISO 1173-C 6.3 bit holders. Series 851/1 Z - Phillips bits. Size: PH2.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" bit for Pozidriv screws PZ3
Artikelnummer: 581811-1 Hersteller: Wera Beschreibung: 1/4" drive; 25mm long. Universal; tough. Compatible with 1/4" drive DIN ISO 1173-C 6.3 bit holders. Series 855/1 Z - Pozidriv bits. Size: PZ3.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" bit for Pozidriv screws PZ2
Artikelnummer: 581810-1 Hersteller: Wera Beschreibung: 1/4" drive; 25mm long. Universal; tough. Compatible with 1/4" drive DIN ISO 1173-C 6.3 bit holders. Series 855/1 Z - Pozidriv bits. Size: PZ2.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" bit for Torxr screws TX15
Artikelnummer: 581819-1 Hersteller: Wera Beschreibung: 1/4" drive; 25mm long. Universal; tough. Compatible with 1/4" drive DIN ISO 1173-C 6.3 bit holders. Series 867/1 - Torxr bits. Size: TX15.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" bit for Torxr screws TX20
Artikelnummer: 581820-1 Hersteller: Wera Beschreibung: 1/4" drive; 25mm long. Universal; tough. Compatible with 1/4" drive DIN ISO 1173-C 6.3 bit holders. Series 867/1 - Torxr bits. Size: TX20.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" bit for Torxr screws TX25
Artikelnummer: 581821-1 Hersteller: Wera Beschreibung: 1/4" drive; 25mm long. Universal; tough. Compatible with 1/4" drive DIN ISO 1173-C 6.3 bit holders. Series 867/1 - Torxr bits. Size: TX25.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" bit for Torxr screws TX10
Artikelnummer: 581818-1 Hersteller: Wera Beschreibung: 1/4" drive; 25mm long. Universal; tough. Compatible with 1/4" drive DIN ISO 1173-C 6.3 bit holders. Series 867/1 - Torxr bits. Size: TX10.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" bit for Torxr screws TX27
Artikelnummer: 581822-1 Hersteller: Wera Beschreibung: 1/4" drive; 25mm long. Universal; tough. Compatible with 1/4" drive DIN ISO 1173-C 6.3 bit holders. Series 867/1 - Torxr bits. Size: TX27.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" bit for Torxr screws TX30
Artikelnummer: 581823-1 Hersteller: Wera Beschreibung: 1/4" drive; 25mm long. Universal; tough. Compatible with 1/4" drive DIN ISO 1173-C 6.3 bit holders. Series 867/1 - Torxr bits. Size: TX30.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" bit for Torxr screws TX40
Artikelnummer: 581824-1 Hersteller: Wera Beschreibung: 1/4" drive; 25mm long. Universal; tough. Compatible with 1/4" drive DIN ISO 1173-C 6.3 bit holders. Series 867/1 - Torxr bits. Size: TX40.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" bit for slotted screws
Artikelnummer: 581855-1 Hersteller: Wera Beschreibung: 1/4" drive; 25mm long. Universal; tough. Compatible with 1/4" drive DIN ISO 1173-C 6.3 bit holders. Series 800/1 Z - Slotted bits. Size: 0.8x5.5.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" bit for slotted screws
Artikelnummer: 581856-1 Hersteller: Wera Beschreibung: 1/4" drive; 25mm long. Universal; tough. Compatible with 1/4" drive DIN ISO 1173-C 6.3 bit holders. Series 800/1 Z - Slotted bits. Size: 1.0x5.5.... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" bit for slotted screws
Artikelnummer: 581857-1 Hersteller: Wera Beschreibung: 1/4" drive; 25mm long. Universal; tough. Compatible with 1/4" drive DIN ISO 1173-C 6.3 bit holders. Series 800/1 Z - Slotted bits. Size: 1.2x6.5.... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Alpen, Sprint master drill size 3,2mm
Artikelnummer: 954183-1 Hersteller: Alpen Beschreibung: Experts are found in all walks of life and in this case; when push comes to shove; the ''okay'' of an average HSS drill may not be enough. Then you need to enter territory where specific expertise is ... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Alpen, Sprint master drill size 3,5mm
Artikelnummer: 954184-1 Hersteller: Alpen Beschreibung: Experts are found in all walks of life and in this case; when push comes to shove; the ''okay'' of an average HSS drill may not be enough. Then you need to enter territory where specific expertise is ... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Alpen, Sprint master drill size 4mm
Artikelnummer: 954185-1 Hersteller: Alpen Beschreibung: Experts are found in all walks of life and in this case; when push comes to shove; the ''okay'' of an average HSS drill may not be enough. Then you need to enter territory where specific expertise is ... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Alpen, Sprint master drill size 4,2mm
Artikelnummer: 954186-1 Hersteller: Alpen Beschreibung: Experts are found in all walks of life and in this case; when push comes to shove; the ''okay'' of an average HSS drill may not be enough. Then you need to enter territory where specific expertise is ... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera nut extractor
Artikelnummer: 581408 Hersteller: Wera Beschreibung: Used to push nuts from sockets with holding function. Made from TPE plastic. 14mm thick x 43.0mm wide.... |
inkl. 19% USt. Mehr Informationen >> |
|
Teng Tools replacement 150mm saw blade
Artikelnummer: 578250-1 Hersteller: TENGTOOLS Beschreibung: Replacement for 578248 mini metal hacksaw.... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Alpen, Sprint master drill size 5,5mm
Artikelnummer: 954190-1 Hersteller: Alpen Beschreibung: Experts are found in all walks of life and in this case; when push comes to shove; the ''okay'' of an average HSS drill may not be enough. Then you need to enter territory where specific expertise is ... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Alpen, Sprint master drill size 5,0mm
Artikelnummer: 954189-1 Hersteller: Alpen Beschreibung: Experts are found in all walks of life and in this case; when push comes to shove; the ''okay'' of an average HSS drill may not be enough. Then you need to enter territory where specific expertise is ... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Alpen, Sprint master drill size 4,8mm
Artikelnummer: 954188-1 Hersteller: Alpen Beschreibung: Experts are found in all walks of life and in this case; when push comes to shove; the ''okay'' of an average HSS drill may not be enough. Then you need to enter territory where specific expertise is ... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Alpen, Sprint master drill size 4,5mm
Artikelnummer: 954187-1 Hersteller: Alpen Beschreibung: Experts are found in all walks of life and in this case; when push comes to shove; the ''okay'' of an average HSS drill may not be enough. Then you need to enter territory where specific expertise is ... |
inkl. 19% USt. Mehr Informationen >> |
|
Bondhus, replacement allen key
Artikelnummer: 582321 Hersteller: BONDHUS Beschreibung: Size 2.5mm. With ball end on the long side... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Bondhus, replacement allen key
Artikelnummer: 582320 Hersteller: BONDHUS Beschreibung: Size 2mm. With ball end on the long side... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Bondhus, replacement allen key
Artikelnummer: 582319 Hersteller: BONDHUS Beschreibung: Size 1.5mm. With ball end on the long side... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Bondhus, replacement allen key
Artikelnummer: 582318 Hersteller: BONDHUS Beschreibung: Size 1.27mm. With ball end on the long side... |
inkl. 19% USt. Mehr Informationen >> |
|
Bondhus, replacement allen key
Artikelnummer: 582304 Hersteller: BONDHUS Beschreibung: Size .050" With ball end on the long side... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Bondhus, replacement allen key
Artikelnummer: 582305 Hersteller: BONDHUS Beschreibung: Size 1/16". With ball end on the long side... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Bondhus, replacement allen key
Artikelnummer: 582306 Hersteller: BONDHUS Beschreibung: Size 5/64". With ball end on the long side... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Bondhus, replacement allen key
Artikelnummer: 582307 Hersteller: BONDHUS Beschreibung: Size 3/32". With ball end on the long side... |
inkl. 19% USt. Mehr Informationen >> |
|
Halder insert for Simplex mallet 40mm Nylon - Hard
Artikelnummer: 582173 Hersteller: Halder Beschreibung: Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet ... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera, deep socket size 17mm
Artikelnummer: 582104 Hersteller: Wera Beschreibung: 8790 HMB deep; 3/8" drive. Extra long sockets for hex bolts and nuts. Chrome vanadium with a brushed chrome plated finish and color coded for finding the right size quickly. Knurled at the base for ea... |
inkl. 19% USt. Mehr Informationen >> |
|
Halder insert for Simplex mallet 50mm Blue TPE - soft
Artikelnummer: 582148 Hersteller: Halder Beschreibung: Used as optional or replacement insert. Simply installs into your Halder hammer head housing allowing you to fine-tune your mallet; with single or even dual component inserts materials in one mallet ... |
inkl. 19% USt. Mehr Informationen >> |
|
Lisle, replacement stone set
Artikelnummer: 530771 Hersteller: LISLE Beschreibung: For 530770 brake cylinder hone... |
inkl. 19% USt. Mehr Informationen >> |
|
Wera 1/4" drive nutsetter - US sizes 7/16"
Artikelnummer: 581843 Hersteller: Wera Beschreibung: 869-4 M. For hex bolts and nuts. Compatible with 1/4" drive DIN ISO 1173-F 6.3 bit holders. Magnetic. Overall length 50mm. Size: 7/16".... |
inkl. 19% USt. Mehr Informationen >> |
|
TENGTOOL ADAPTOR 1/2 INCH TO 3/4 INCH
Artikelnummer: 521144 Hersteller: TENGTOOLS Beschreibung: 1/2" drive ratchet to 3/4" drive socket. Chrome vanadium. Satin finish. Enables the use of a ratchet drive with a different sized socket drive.... |
inkl. 19% USt. Mehr Informationen >> |
|
Teng Tools, screwdriver magnetizer
Artikelnummer: 521105 Hersteller: TENGTOOLS Beschreibung: Used to magnetize or demagnetize screwdrivers.... |
inkl. 19% USt. Mehr Informationen >> |
|
Oiling can, universal. Steel
Artikelnummer: 521099 Hersteller: MCS Beschreibung: Universal steel oil can with a rigid and flexible spout. Equipped with a brass pump and 300cc (10oz) capacity.... |
inkl. 19% USt. Mehr Informationen >> |
|
Teng Tools, allen wrench set
Artikelnummer: 521073 Hersteller: TENGTOOLS Beschreibung: US sizes. 10-pc hex key set on ring. Sizes include: 1/16; 5/64; 3/32; 1/8; 5/32; 3/16; 7/32; 1/4; 5/16 and 3/8 inch.... |
inkl. 19% USt. Mehr Informationen >> |