. |
|
Custom-Parts Verschleißteile Ersatzteile Bekleidung Accessoires |
|
Startseite >> | Ihre Suchergebnisse zur Kategorie: Werkzeug f. Getriebe | Sortiert nach niedrigster Preis aufsteigend
|
George''s Garage, maindrive gear bearing & seal tool
Artikelnummer: 979452 Hersteller: George''s Garage Beschreibung: Used to install main drive gear inner & outer bearing on 6-speeds. Also installs main drive gear seal. Transmission must be removed from bike... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, main drive gear seal install tool
Artikelnummer: 979448 Hersteller: George''s Garage Beschreibung: Used to install 12074 main drive gear seal. Includes pilot for seal protection. Can be used with transmission in frame.... |
inkl. 19% USt. Mehr Informationen >> |
|
Jims, transmission maindrive gear bearing installer
Artikelnummer: 978358 Hersteller: JIMS Beschreibung: Used to install inner / outer 5th gear bearing to standard factory depth; and the seal on clutch side. Also presses in the needle baring on the clutch side of the gear; Holds bearing & seal square t... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, 5-sp mainshaft seal install tool
Artikelnummer: 978650 Hersteller: JIMS Beschreibung: Ensures correct alignment; seal protection; and depth when installing the seal... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, REPL. BEARING PLATE
Artikelnummer: 978499 Hersteller: JIMS Beschreibung: Replacement for 978349 mainshaft bearing race tool.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, maindrive gear bearing install tool
Artikelnummer: 978359 Hersteller: JIMS Beschreibung: Used to install inner and outer 5th gear bearings to factory depth. New bearing depth incorporated; will still work on early depth; For stock 5-speed & custom 6-speed transmissions... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, maindrive gear/cam bushing tool
Artikelnummer: 978268 Hersteller: JIMS Beschreibung: Removes & installs main drive gear bushing; Installs cam bushing... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, transmission sprocket/pulley nut socket
Artikelnummer: 962048 Hersteller: JIMS Beschreibung: Removes and installs the 2-1/2" hex nut (35211-91B); the thin but large left hand threaded nut; that holds the rear transmission sprocket/pulley onto the mainshaft. Heavy-Duty extra thick wall design.... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, 4&5-speed transmission pulley nut socket
Artikelnummer: 925540 Hersteller: MCS Beschreibung: Used to install and remove the large 1-7/8" hex nut that holds the transmission pulley on 4 and 5-speed models. Note that these nuts (35211-36 for earlier and 35211-91B for later models) are left hand... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, transmission mainshaft seal driver
Artikelnummer: 978353 Hersteller: JIMS Beschreibung: DRIVER ONLY; TO BE USED WITH 978351 JIMS TOOL... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, transm. mainshaft oil seal installer
Artikelnummer: 979481 Hersteller: George''s Garage Beschreibung: Used to install the large OEM 12074 mainshaft oil seal straight and to correct depth; without damage to bearings... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, 6-speed transmission shaft vise stand
Artikelnummer: 978646 Hersteller: JIMS Beschreibung: - Transmission holder is securely to be clamped in a vice - Used to hold the transmission shafts in perfect alignment for a quick and efficient assembly... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, transmission pulley lock tool
Artikelnummer: 925541 Hersteller: MCS Beschreibung: Used to lock the transmission pulley (belt sprocket) when installing or removing the transmission pulley nut. Fits 4 & 5-speed rear belt drive B.T. models and most aftermarket 6-speeds for 80-06 5-sp ... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, 5-sp transm. shaft installer tool
Artikelnummer: 978365 Hersteller: JIMS Beschreibung: Used to install transmission shaft assemblies without the use of a (hydraulic) press.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, shifter shaft sleeve tool
Artikelnummer: 962045 Hersteller: JIMS Beschreibung: Removes & installs 35243-06 shifter sleeve (bushing) on 6-speed transmission cases; Transmission disassembly not required... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, transmission / sprocket nut tool
Artikelnummer: 979438 Hersteller: George''s Garage Beschreibung: Can be used with impact air wrenches. -7/8" hex with 1/2" drive. Removes & installs the 1-1/2"-24 hex nut (35211-36 and 35211-91B) transmission mainshaft pulley/sprocket nuts. Note these nuts are left... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, trapdoor puller tool
Artikelnummer: 979449 Hersteller: George''s Garage Beschreibung: Used to remove transmission doors; with gears and shaft attached; without causing damage to door bearings.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, shifter lever sleeve tool
Artikelnummer: 962047 Hersteller: JIMS Beschreibung: Removes & installs 33173-85B & 42642-00A shifter shaft bushings in the inner primary housing... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, transm. maindrive gear bearing tool
Artikelnummer: 978357 Hersteller: JIMS Beschreibung: Used to install maindrive gear bearing OEM 8905 (L77-81 4-sp B.T.) or OEM 8906 (82-86 4-sp B.T.) to proper factory depth... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, transmission mainshaft seal driver
Artikelnummer: 978354 Hersteller: JIMS Beschreibung: DRIVER ONLY; TO BE USED WITH 978351 JIMS TOOL... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, external lock ring pliers
Artikelnummer: 978368 Hersteller: JIMS Beschreibung: Used to install & remove snap rings (retaining rings) MCS 961365; 500975 / OEM 11067 as used on the transmission main and countershaft. Jaws are scored on the outside to hold the retaining ring secure... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, transmission mainshaft seal driver
Artikelnummer: 978355 Hersteller: JIMS Beschreibung: DRIVER ONLY; TO BE USED WITH JIMS 978351 TOOL... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, transmission / sprocket nut tool
Artikelnummer: 979439 Hersteller: George''s Garage Beschreibung: Used to install & remove the 2-1/4 hex (regular right hand threaded) sprocket/pulley locknut on the transmission mainshaft. Works with both belt & chain drive models. With inner pilot for good alignme... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, 6-sp transmission door bearing tool
Artikelnummer: 925558 Hersteller: MCS Beschreibung: Used to install and remove transmission trapdoor bearings (8970 for Twin Cam and 8970A and 110000010 for M8) on 6-speed transmissions. Can be used to remove the trapdoor itself but then bearings will ... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, 6-sp transmission pulley nut socket
Artikelnummer: 925544 Hersteller: MCS Beschreibung: Used to install and remove the large 2-1/4" hex nut (35241-06; regular right hand threaded) that holds the rear drive transmission pulley.... |
inkl. 19% USt. Mehr Informationen >> |
|
Lap head, transmission lapping tool
Artikelnummer: 512903 Hersteller: Eastern Beschreibung: 1.300" cast iron... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, transmission pulley lock tool
Artikelnummer: 979437 Hersteller: George''s Garage Beschreibung: Used to lock the transmission pulley (belt sprocket) for removal and assembly of pulley nut... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, transmission door bearing tool
Artikelnummer: 979444 Hersteller: George''s Garage Beschreibung: Used to remove & install transmission bearings; Will also remove transm. door without removing the gear set or transm. assembly; Note: Door bearings must be replaced if using this tool to remove the ... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, main drive gear seal installer
Artikelnummer: 978325 Hersteller: JIMS Beschreibung: Incl. 576558 driver handle; Installs seal MCS 908250 / OEM 12013A and MCS 519891 / OEM 12035B on assembled transmission to correct depth... |
inkl. 19% USt. Mehr Informationen >> |
|
|
Lap head, transmission lapping tool
Artikelnummer: 512904 Hersteller: Eastern Beschreibung: 1.870" cast iron... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, 6-speed main drive gear bearing & seal install tool
Artikelnummer: 978438 Hersteller: JIMS Beschreibung: Used to install main drive gear bearings and seal on 6-speed transmissions. Tool will hold bearings and seal square to it's bore; eliminating any marring of the bearings and seals and installing both ... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, main drive gear seal installer
Artikelnummer: 978510 Hersteller: JIMS Beschreibung: Installs OEM 12074 seal on assembled transmission to correct depth... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, 5-sp transm. door puller
Artikelnummer: 978366 Hersteller: JIMS Beschreibung: Used to remove 5-sp transm. trapdoors. Pulls door; with gears and shafts attached. No scratches; damage or frustrations. Puller will not damage door bearings. Note: Also fits most custom 6-speed tran... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, transmission door bearing tool
Artikelnummer: 979445 Hersteller: George''s Garage Beschreibung: Used to remove & install transmission bearings; Will also remove transm. door without removing the gear set or transm. assembly; Note: Door bearings must be replaced if using this tool to remove the ... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, 6-sp transm. cover bearing tool
Artikelnummer: 979446 Hersteller: George''s Garage Beschreibung: Used to remove & install transmission bearings; Will also remove transm. door without removing the gear set or transm. assembly; Note: Door bearings must be replaced if using this tool to remove the ... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, shift fork alignment tool
Artikelnummer: 513765 Hersteller: JIMS Beschreibung: Used to set and align shifter forks on 4-speed Big Twin transmissions... |
inkl. 19% USt. Mehr Informationen >> |
|
Lap head & pilot, transmission lapping tool
Artikelnummer: 512908 Hersteller: Eastern Beschreibung: 1.300" cast iron... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, kickstart bushing tool
Artikelnummer: 925576 Hersteller: MCS Beschreibung: Starter crank bushing installation tool. Used to install and remove OEM style 33288-37 kickstart bushing in the transmission end cover (kickstart cover) of 4-speed Big Twin models with kickstart.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, shift fork alignment tool
Artikelnummer: 513766 Hersteller: JIMS Beschreibung: Used to set and align shifter forks on 4-speed Big Twin transmissions... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, 6-sp transmission main drive gear remove tool
Artikelnummer: 925545 Hersteller: MCS Beschreibung: Used to remove the transmission main drive gear from the main drive bearing on all 6-speed B.T. models. Can be used without removing the transmission from the bike. Note: See 925565 for bearing inst... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, 5-sp maindrive gear & bearing tool
Artikelnummer: 925530 Hersteller: MCS Beschreibung: Used to install & remove the main drive gear and installs the main bearing on 5-speed transmissions. Tool will provide a correct bearing angle for a straight insertion to prevent damage to the bearing... |
inkl. 19% USt. Mehr Informationen >> |
|
Lap head & pilot, transmission lapping tool
Artikelnummer: 512907 Hersteller: Eastern Beschreibung: 1.870" cast iron... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, 5-speed transmission main bearing puller
Artikelnummer: 978360 Hersteller: JIMS Beschreibung: Used to pull the main drive gear bearing straight from the transmission case; without damage or removing the case from the frame... |
inkl. 19% USt. Mehr Informationen >> |
|
Evolution Industries, transm. sprocket/pulley nut wrench
Artikelnummer: 552104 Hersteller: EVOLUTION INDUSTRIES Beschreibung: Used to remove & install the large (regular right hand threaded) nut that holds the transmission pulley or transmission sprocket on the transmission mainshaft. Works with both belt & chain drive model... |
inkl. 19% USt. Mehr Informationen >> |
|
Evolution Industries, transmissio sprocket/pulley nut wrench
Artikelnummer: 552103 Hersteller: EVOLUTION INDUSTRIES Beschreibung: Used to remove & install the large 1-7/8" (left hand threaded) nut that holds the transmission pulley or transmission sprocket on the transmission mainshaft. Works with both belt & chain drive models.... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, mainshaft bearing race tool
Artikelnummer: 979440 Hersteller: George''s Garage Beschreibung: Used to remove and install the inner bearing race on the transmission mainshaft... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, mainshaft oil seal installer
Artikelnummer: 961590 Hersteller: JIMS Beschreibung: The small cap is used to guide the large OEM 12074 mainshaft oil seal on to the mainshaft. Seal is installed straight and to correct depth with help of the larger installer; without damage or stress t... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, 6-sp transm. door puller tool
Artikelnummer: 978487 Hersteller: JIMS Beschreibung: Used to remove 6-sp transm. trapdoors. Pulls door; with gears and shafts attached. No scratches; damage or frustrations. Puller will not damage door bearings.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, compensator lock kit
Artikelnummer: 978604 Hersteller: JIMS Beschreibung: Prevents compensator sprocket assembly from working itself loose. Peace of mind is key when it comes to building a high performance powertrain. The Compensating Sprocket Lock Kit is now ready and avai... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, transmission lock tool 5 & 6-speed
Artikelnummer: 961591 Hersteller: JIMS Beschreibung: Used to lock the transmission belt pulley when installing & removing the pulley nut.... |
inkl. 19% USt. Mehr Informationen >> |