. |
|
Custom-Parts Verschleißteile Ersatzteile Bekleidung Accessoires |
|
Startseite >> | Ihre Suchergebnisse zur Kategorie: Werkzeug f. Kupplungen | Sortiert nach niedrigster Preis aufsteigend
|
JIMS, clutch jam nut adjusting tool
Artikelnummer: 978645 Hersteller: JIMS Beschreibung: Enables holding/tightening the mainshaft (jam)nut while adjusting/holding the pushrod adjuster screw in the correct position with the supplied allen wrench / hex key.... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, clutch spring compressor tool
Artikelnummer: 925520 Hersteller: MCS Beschreibung: Used to release clutch spring for removal and installation of the clutch spring retaining ring. An adapter for XL Sportster models is included.... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, clutch spring compressor
Artikelnummer: 979429 Hersteller: George''s Garage Beschreibung: Used to release clutch spring for removal and installation of retaining ring. Note: Order 979430 adapter separately for use on XL Sportster models.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, clutch spring compressor tool
Artikelnummer: 512669 Hersteller: JIMS Beschreibung: Tool to help install and remove the clutch spring retaining ring. Repl. 34761.... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, clutch adjusting tool
Artikelnummer: 925548 Hersteller: MCS Beschreibung: Deep socket design allows this socket to access the lock nut of the clutch adjuster. The hole allows final adjustment and a correct position-hold with an allen wrench / hex key; after which the lockn... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, multifunctional clutch hub puller tool
Artikelnummer: 978348 Hersteller: JIMS Beschreibung: Multi-purpose tool. Used to pull; amongst others; clutch hubs. This puller is numbered for pulling the following items. A 45" Flatheads - Clutch. B Big Twin - Clutch; all 3; 5 and 10 finger hubs. C... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, clutch shell lock tool
Artikelnummer: 978344 Hersteller: JIMS Beschreibung: Prevents clutch hub from rotating when installing/removing clutch hub nut.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, clutch hub puller tool
Artikelnummer: 998009 Hersteller: JIMS Beschreibung: Used to pull the clutch hub from the mainshaft. For both wet and dry clutches. Included 4 bolts for dry clutch removal. Repl. 95960-52C.... |
inkl. 19% USt. Mehr Informationen >> |
|
Motion Pro, heavy duty clutch holding tool
Artikelnummer: 954364 Hersteller: MOTION PRO Beschreibung: This tool securely holds clutch hubs on most motorcycles and ATVs. It can be used to remove the locking ring on UTV fuel cells to remove fuel pumps - Reversible blades work on conventional square spl... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, clutch spring compressor tool
Artikelnummer: 960967 Hersteller: JIMS Beschreibung: Tool to help install and remove the clutch spring retaining ring. Note: See 970347 for the optional adapter nut that is required for this tool to function on XL Sportster and Buell models.... |
inkl. 19% USt. Mehr Informationen >> |
|
Motion Pro, clutch hub nut tool
Artikelnummer: 547220 Hersteller: MOTION PRO Beschreibung: Allows to remove & install clutch hub nut with 11/16" wrench; Opening in middle allows access to clutch adjuster screw... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, clutch spring compressor tool
Artikelnummer: 900558 Hersteller: JIMS Beschreibung: Used to compress clutch springs on Sportster models. OEM style replacement for 97178-71 tool.... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, clutch bearing tool set
Artikelnummer: 925567 Hersteller: MCS Beschreibung: Complete tool set to assemble and disassembly the clutch shell assembly. Used to install and remove the double row clutch shell ball bearing 37906-90 (MCS 518779). Installs without any damage to the n... |
inkl. 19% USt. Mehr Informationen >> |
|
Barnett, Scorpion clutch hub lock plate tool
Artikelnummer: 905653 Hersteller: BARNETT Beschreibung: Used with Barnett Scorpion clutches only. Designed to lock the outer clutch basket to the inner clutch hub.... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, clutch hub removal tool
Artikelnummer: 925573 Hersteller: MCS Beschreibung: Use to remove clutch hub from the transmission mainshaft. Slight tap onto the transmission mainshaft to remove clutch hub. Left-hand thread.... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, 5-sp transmission case shifter shaft seal installer
Artikelnummer: 951572 Hersteller: MCS Beschreibung: Used to install MCS 526160 / OEM 12045 oil seal behind the shifter arm on 5-speed transmissions.... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, transmission case shifter seal installer
Artikelnummer: 951573 Hersteller: MCS Beschreibung: Used to install H-D 37101-84B shifter shaft seal behind the shifter arm on the transmission of 6-speed Cruise Drive'' H-D transmissions and some XL Sportster models.... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, V-Rod clutch plate alignment assembly tool
Artikelnummer: 925543 Hersteller: MCS Beschreibung: Used for correctly aligned clutch plates in the clutch shell during installation of the clutch plate pack.... |
inkl. 19% USt. Mehr Informationen >> |
|
Clutch hub puller tool
Artikelnummer: 519750 Hersteller: MCS Beschreibung: Used to pull the clutch hub from the tapered transmission mainshaft. Replaces OEM 95960-41A.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, clutch hub locking tool
Artikelnummer: 978448 Hersteller: JIMS Beschreibung: Used to lock the clutch hub assembly in place when removing and installing the clutch hub nut... |
inkl. 19% USt. Mehr Informationen >> |
|
Motion Pro, clutch basket holding tool
Artikelnummer: 547685 Hersteller: MOTION PRO Beschreibung: Medium carbon steel with hardened jaws; Used to hold clutch basket and final drive sprockets... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, clutch spring adapter nut
Artikelnummer: 979430 Hersteller: George''s Garage Beschreibung: For use with 979429 clutch spring compressor tool. Makes 979429 compatible with XL Sportster and Buell models.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, clutch hub locking tool
Artikelnummer: 961436 Hersteller: JIMS Beschreibung: Used to lock the clutch hub assembly in place when removing and installing the clutch hub nut... |
inkl. 19% USt. Mehr Informationen >> |
|
Gardner-Westcott, clutch spring washer tool
Artikelnummer: 993593 Hersteller: GARDNER-WESTCOTT Beschreibung: Used to compress and hold the clutch springs on 4-speed; and pre-84 5-speed; so that the pressure plate; springs and spring retainer can be removed as one unit.... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, clutch hub puller tool
Artikelnummer: 951568 Hersteller: MCS Beschreibung: - Used to pull the clutch hub from the tapered transmission mainshaft - Compatible with all 3-stud OEM and custom 5 and 10-stud clutch hubs - Replacement for OEM 95960-41A tool.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, V-Rod clutch plate alignment tool
Artikelnummer: 978446 Hersteller: JIMS Beschreibung: Used to align the clutch plates during assembly of the clutch basket.... |
inkl. 19% USt. Mehr Informationen >> |
|
PISTON RING GROOVE CLEANER
Artikelnummer: 530799 Hersteller: LISLE Beschreibung: Fits 2 3/4" up to 5" (70mm to 127mm) pistons; Incl. 2 cleaning spurs with sizes: 5/64"; 3/32"; 1/8"; 5/32"; 3/16"; 1/4"; 1.5mm; 1.75mm and 2mm... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, clutch hub & basket tool
Artikelnummer: 978507 Hersteller: JIMS Beschreibung: Used to assemble and disassembly the clutch hub assembly. Also installs & removes the ball bearing (MCS 518779 / OEM 37906-90) from the clutch shell/basket without damage to the new bearing by pushing... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, clutch hub puller
Artikelnummer: 925549 Hersteller: MCS Beschreibung: Used to pull the clutch hub from the mainshaft. Includes 4 bolts for dry clutch removal.... |
inkl. 19% USt. Mehr Informationen >> |
|
Motion Pro, clutch spring tool
Artikelnummer: 547203 Hersteller: MOTION PRO Beschreibung: Used to release clutch spring for removal and installation of retaining ring. Includes adapter for Sportster models... |
inkl. 19% USt. Mehr Informationen >> |
|
Clutch spring compressor tool
Artikelnummer: 500558 Hersteller: MCS Beschreibung: Used to release clutch spring for removal and installation of retaining ring. Adapter for XL Sportster models is included.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, clutch spring compressor nut
Artikelnummer: 970347 Hersteller: JIMS Beschreibung: Optional nut that makes 960767 clutch spring comrpessor tool compatible with XL Sportster and Buell XB models.... |
inkl. 19% USt. Mehr Informationen >> |
|
Barnett, Scorpion clutch hub puller tool
Artikelnummer: 905658 Hersteller: BARNETT Beschreibung: Fits all Scorpion clutch hubs; excl. 71-83 XL models. Billet aluminum with 7/16" hex bolt with protection cap. Will not damage mainshaft.... |
inkl. 19% USt. Mehr Informationen >> |