. |
|
Custom-Parts Verschleißteile Ersatzteile Bekleidung Accessoires |
|
Startseite >> | Ihre Suchergebnisse zur Kategorie: Werkzeug f. Motoren | Sortiert nach niedrigster Preis aufsteigend
|
JIMS, replacement grinding blades
Artikelnummer: 961428 Hersteller: JIMS Beschreibung: Replacement blades for 961427 piston ring end gap tool... |
inkl. 19% USt. Mehr Informationen >> |
|
Motion Pro, tappet adjuster tool set
Artikelnummer: 938834 Hersteller: MOTION PRO Beschreibung: - Allows precise valve lash adjustment without disturbing the setting when the lock nut is fastened - Knurled knob on adjuster drivers ensure a precise and secure grip - Integrated repositionable wren... |
inkl. 19% USt. Mehr Informationen >> |
|
KPMI, valve guide reamer 6mm. Manganese & cast iron
Artikelnummer: 588729 Hersteller: Kibblewhite Beschreibung: Outside diameter 0.2357" (5.98678mm) HSS. Cutting diameter tolerance +/- .0002". Overall length: 7-1/8" (181mm). Nickel finish. For use with KPMI Manganese Bronze & Cast Iron valve guides only. Note... |
inkl. 19% USt. Mehr Informationen >> |
|
KPMI VALVE GUIDE REAMERS 0.3110 HSS
Artikelnummer: 525723 Hersteller: Kibblewhite Beschreibung: .3110" - 5/16" (7.8994mm); For cast iron; manganese bronze; C630 bronze & Ampco-45 bronze valve guides... |
inkl. 19% USt. Mehr Informationen >> |
|
KPMI VALVE GUIDE REAMERS 0.3100 HSS
Artikelnummer: 525722 Hersteller: Kibblewhite Beschreibung: .3100" - 7mm (7.874mm); For cast iron; manganese bronze; C630 bronze & Ampco-45 bronze valve guides... |
inkl. 19% USt. Mehr Informationen >> |
|
KPMI VALVE GUIDE REAMERS 0.2770 HSS
Artikelnummer: 525721 Hersteller: Kibblewhite Beschreibung: .2770" - 7mm (7.0358mm); For cast iron; manganese bronze; C630 bronze & Ampco-45 bronze valve guides... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, piston ring end gap tool
Artikelnummer: 962024 Hersteller: JIMS Beschreibung: For 3.875" (3-7/8") & 4.000" bore pistons... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, Big Twin pinion gear lock tool
Artikelnummer: 925538 Hersteller: MCS Beschreibung: Used to lock the pinion gear; allowing removal or installation of the pinion gear nut.... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, rocker arm bushing install/remove tool
Artikelnummer: 925535 Hersteller: MCS Beschreibung: Used to remove and install rocker arm bushings to factory depth. Includes one remover and one install tool. The use of a press or uncontrolled force is not required.... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, wristpin clip tool
Artikelnummer: 925534 Hersteller: MCS Beschreibung: Used to easily remove and install the wire type wristpin clips without hassle; over-squeezing clip or damage to piston. Note: Not for use with forged pistons.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, Head Holder/Guide install & remove tool
Artikelnummer: 978385 Hersteller: JIMS Beschreibung: Used to hold the cylinder head (OEM & all aftermarket heads). A special valve guide alignment shaft is designed into this tool and will hold the correct angle for best possible guide installations; in... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, shoulderless valve guide remover tool / handle
Artikelnummer: 961423 Hersteller: JIMS Beschreibung: Used to remove 7mm shoulderless valves guides. Note: Use with JIMS 961420 handle (not included). Note: Also used as handle with several JIMS valve guide tools.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, pushrod clip tool
Artikelnummer: 961575 Hersteller: JIMS Beschreibung: Used to push down the 17945-36B style spring cup/cover; so the pushrod retainers can be installed/removed without damage on all H-Dr pushrod covers. This tool will let you do it with one hand; without... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, piston ring end gap tool
Artikelnummer: 962025 Hersteller: JIMS Beschreibung: For 4.125" & 4.310" bore pistons... |
inkl. 19% USt. Mehr Informationen >> |
|
Engine / Crankcase lapping tool kit
Artikelnummer: 512901 Hersteller: Eastern Beschreibung: Used to line lap bushings to factory specifications... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, oil pump snap ring installer
Artikelnummer: 978312 Hersteller: JIMS Beschreibung: Used to install outer retaining ring on the oil pump drive shaft... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, insert only for tappet pump test stand
Artikelnummer: 962006 Hersteller: JIMS Beschreibung: Adapter only; used for testing Evolution hydraulic tappets in 962005 JIMS tappet pump test stand... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, cam gear remove tool
Artikelnummer: 978387 Hersteller: JIMS Beschreibung: Used to remove the camshaft gear; Note: Use 978294 tool to install/reposition the cam drive gear... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, wristpin tool
Artikelnummer: 979400 Hersteller: George''s Garage Beschreibung: Removes and installs the wristpin in a controllable process with slide hammer action. No need to use force.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, engine & transmission plug kit
Artikelnummer: 962014 Hersteller: JIMS Beschreibung: Used instead of rags. Provides enough plugs to fully seal all Twin Cam and transmission holes to prevent dirt and dust from entering while it is apart during a rebuild or repair.... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, 45A alternator rotor puller tool
Artikelnummer: 925554 Hersteller: MCS Beschreibung: Used to pull the alternator rotor from the sprocket shaft; without issues associated with strong magnets. Pulls simple and direct without damage to any components. Designed for use on most Touring mo... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, adapter wristpin remover tool
Artikelnummer: 559399 Hersteller: JIMS Beschreibung: To be used with 978211 wristpin remover tool.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, cam bearing installer tool
Artikelnummer: 978290 Hersteller: JIMS Beschreibung: Used to install the inner cam needle bearing into the case; Note: Used with 920542 driver handle; Note: See 978291 for cam bearing remover tool... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, cylinder hold down nuts
Artikelnummer: 559402 Hersteller: JIMS Beschreibung: Blue anodized. Holds cylinders down when heads are removed; so crankshaft can be rotated for tuning or other service. Dual threaded on both ends to fit cylinder studs of both Twin Cam and M8 engines. ... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, cylinder head holder tool. 12mm/14mm
Artikelnummer: 978381 Hersteller: JIMS Beschreibung: With 12 & 14mm threaded ends. Used to help hold the cylinder head firmly in a workbench vice; through the spark plug hole; to aid in servicing / overhaul work.... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, wristpin bushing driver tool
Artikelnummer: 979409 Hersteller: George''s Garage Beschreibung: Used to install and remove new wristpin bushings without removing connecting rods from the crankcase. Removes and installs both bushings in less than 5 minutes.... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, wristpin bushing driver tool
Artikelnummer: 979401 Hersteller: George''s Garage Beschreibung: Used to install and remove new wristpin bushings without removing connecting rods from the crankcase. Removes and installs both bushings in less than 5 minutes.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, cam bearing installer tool
Artikelnummer: 978289 Hersteller: JIMS Beschreibung: Used to install cam bearing. Note: MCS 920542 installation handle is required and sold separately.... |
inkl. 19% USt. Mehr Informationen >> |
|
Motion Pro, Compression Tester
Artikelnummer: 937997 Hersteller: MOTION PRO Beschreibung: Used to check dynamic cylinder compression. Comes with a 300 psi gauge with a protective rubber ring and special threaded screw-on adapters for 10; 12 and 14mm spark plug threads. The hose is equipped... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, Timken bearing simulator tool
Artikelnummer: 978342 Hersteller: JIMS Beschreibung: Used to allow easy removal and replacement of the flywheel assembly in the left crankcase when checking rod to case; piston to flywheel and cylinder to flywheel clearances... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, pushrod tube holder tool
Artikelnummer: 925537 Hersteller: MCS Beschreibung: Used to prevent the lower pushrod from falling down when doing pushrod adjustments.... |
inkl. 19% USt. Mehr Informationen >> |
|
Feuling, replacement gasket
Artikelnummer: 566118 Hersteller: FEULING Beschreibung: For 566117 oil pump pressure relief valve test tool... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, cam/sprocket lock tool
Artikelnummer: 978239 Hersteller: JIMS Beschreibung: Used to lock the camshaft gears and pinion gear sprocket for proper removal and torquing to correct specifications. Tool is made from non-marring Delrin.... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, exhaust stud drill jig
Artikelnummer: 979428 Hersteller: George''s Garage Beschreibung: Tool used to help drill out broken exhaust studs in the cylinder head. Drill bit included.... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, cam bearing remover tool
Artikelnummer: 925550 Hersteller: MCS Beschreibung: Used to pull the camshaft roller bearing from the camshaft after camshafts are removed from support plate. Pulls straight and reliable without issues.... |
inkl. 19% USt. Mehr Informationen >> |
|
KPMI VALVE GUIDE REAMERS 0.3780 HSS
Artikelnummer: 525725 Hersteller: Kibblewhite Beschreibung: .3780" - 3/8" (9.6012mm); For cast iron; manganese bronze; C630 bronze & Ampco-45 bronze valve guides... |
inkl. 19% USt. Mehr Informationen >> |
|
KPMI VALVE GUIDE REAMERS 0.3770 HSS
Artikelnummer: 525724 Hersteller: Kibblewhite Beschreibung: .3770" - 5/16" (9.5758mm); For cast iron; manganese bronze; C630 bronze & Ampco-45 bronze valve guides... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, pinion gear locking tool
Artikelnummer: 979423 Hersteller: George''s Garage Beschreibung: Used to lock the pinion gear for nut removal.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, shoulderless valve guide installer tool
Artikelnummer: 961421 Hersteller: JIMS Beschreibung: Used to install valve guides equipped with 18046-98 5/16x.530" Steel Gripr valve seals to proper depth. Note: Use with JIMS 961423 handle (not included).... |
inkl. 19% USt. Mehr Informationen >> |
|
MCS, 6-sp transmission door puller tool
Artikelnummer: 925556 Hersteller: MCS Beschreibung: Used to pull the transmission door; complete with gears and shafts attached; from the transmission case. Does not damage door bearings. Can be used with the transmission installed in the frame.... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, sprocket shaft bearing race tool
Artikelnummer: 978337 Hersteller: JIMS Beschreibung: Used to install and remove sprocket shaft bearing race from left side crankcase; Note: Used with 920542 JIMS driver handle... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, sprocket bearing race tool
Artikelnummer: 978338 Hersteller: JIMS Beschreibung: Used to install and remove sprocket shaft bearing race from left side crankcase; Note: Used with 920542 JIMS driver handle... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, compensating sprocket shaft nut wrench
Artikelnummer: 978326 Hersteller: JIMS Beschreibung: Used to install and remove the primary drive compensating sprocket nut... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, inner cam bearing gauge pins (pr)
Artikelnummer: 978383 Hersteller: JIMS Beschreibung: Used to check the inner size of the cam needle bearing. With not enough press-fit the cam can rock; causing noise and unnecessary cam/bearing and roller wear. Too tight bearing can damage cam and cam ... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, flywheel socket 1-5/16 x 1/2 drive
Artikelnummer: 978431 Hersteller: JIMS Beschreibung: Installs and removes 23966-54A crank pin nut. Used when rebuilding flywheel assemblies. Machined flat at the receiving end and have a low profile with just adequate length for 100% nut to socket conta... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, cam & pinion gear gauge pins .108"
Artikelnummer: 979403-1 Hersteller: George''s Garage Beschreibung: .108 inch diameter. Used to check pinion and cam gears for pitch diameters. A loose fit results in a clicking noise but a tight fit in a whining noise that may result in gear tooth & bearing damage. N... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, cam & pinion gear gauge pins .105"
Artikelnummer: 979402-1 Hersteller: George''s Garage Beschreibung: .105 inch diameter. Used to check pinion and cam gears for pitch diameters. A loose fit results in a clicking noise but a tight fit in a whining noise that may result in gear tooth & bearing damage. F... |
inkl. 19% USt. Mehr Informationen >> |
|
Motion Pro, oil pump / tappet screen plug tool
Artikelnummer: 547202 Hersteller: MOTION PRO Beschreibung: Used to remove & install OEM style slotted oil pump and tappet screen plugs with a regular open end wrench to prevent damage to OEM plugs. Provides improved access with some exhaust headers when using... |
inkl. 19% USt. Mehr Informationen >> |
|
Lang Tools, compression tester
Artikelnummer: 599155 Hersteller: LANG TOOLS Beschreibung: Designed for motorcycle use. Includes a metal clip that can be clipped to the gauge. The gauge can then be clipped to the bike''s frame or handlebar leaving pour hands free. Includes adapters for 10mm... |
inkl. 19% USt. Mehr Informationen >> |
|
George''s Garage, cam bearing installer tool
Artikelnummer: 979405 Hersteller: George''s Garage Beschreibung: Used to install the needle bearing from crankcase with a controlled press-in action; Case disassembly is not required Note: See 979404 for remover tool... |
inkl. 19% USt. Mehr Informationen >> |