. |
|
Custom-Parts Verschleißteile Ersatzteile Bekleidung Accessoires |
|
Startseite >> | Ihre Suchergebnisse zur Kategorie: Werkzeug f. Oelpumpen | Sortiert nach niedrigster Preis aufsteigend
|
Feuling, crankshaft run-out check tool
Artikelnummer: 588064 Hersteller: FEULING Beschreibung: Used to check flywheel run-out (trueness) from the pinionshaft while assembled in the crankcase. Also checks gear backlash in combination with gear driven cams. Tool includes tool plate; +/-0.001" dia... |
inkl. 19% USt. Mehr Informationen >> |
|
Feuling, cam plate/oil pump reamer tool
Artikelnummer: 588062 Hersteller: FEULING Beschreibung: Used to ream the pressure relief valve seat of the cam plate in all Twin Cam engines and in the oil pump of M8 engines. Compatible with OEM and aftermarket cam plates. Feuling recommends a new relief ... |
inkl. 19% USt. Mehr Informationen >> |
|
Feuling, lifter block bore measuring kit
Artikelnummer: 588060 Hersteller: FEULING Beschreibung: Used to check the correct bore diameter and roundness of the lifter bore diameter. Includes 5 precision ground round steel balls. Feuling advises a tolerance of 0.001" to 0.0015". Sizes include: 0.843... |
inkl. 19% USt. Mehr Informationen >> |
|
JIMS, solid brass punch set - oil pump
Artikelnummer: 978311 Hersteller: JIMS Beschreibung: 4-piece punch set used to seat the oil pump check ball; without damage to the ball; in the oil pump for a perfect seal. Includes 3/8" x 6"; 1/2" x 8"; 5/8" x 9" & 3/4" x 10" punches.... |
inkl. 19% USt. Mehr Informationen >> |
|
ERT, installation tool spring kit
Artikelnummer: 909503 Hersteller: ERT Beschreibung: Required for installation of the 909502 ''Superpump'' spring kit in the cam support plate... |
inkl. 19% USt. Mehr Informationen >> |
|
Feuling, replacement air regulator
Artikelnummer: 588063 Hersteller: FEULING Beschreibung: Replacement for 566117 relief valve test tool. 1/8 NPT gauge fitting; 1/4 NPT air inlet and outlet... |
inkl. 19% USt. Mehr Informationen >> |
|
Feuling, oil pump pressure tester
Artikelnummer: 588061 Hersteller: FEULING Beschreibung: Used to bench test Feuling M8 oil pumps (tester will not fit OEM M8 pumps). Used for PSI pressure opens the relief valve. The spring tension can be adjusted to achieve the desired pop-off PSI. Tool in... |
inkl. 19% USt. Mehr Informationen >> |
|
Feuling, oil pump roll pin remover/installer tool
Artikelnummer: 588059 Hersteller: FEULING Beschreibung: Used to install and remove OEM 601 roll pin in the oil pump.... |
inkl. 19% USt. Mehr Informationen >> |